Bubble Waffle Maker,Waffle Maker,Commercial Waffle Machine,Industrial Waffle Maker Guangzhou New Power Catering Equipment Manufacturing Co.,Ltd , https://www.gznewpower.com
There are also technical problems with the feeding and discharging of the dryer, and many aspects still rely on practical experience. From an economic point of view, the amount of processing is also one of the factors in selecting the type of drying equipment. Table 1-7 is a summary of the dryer selected based on the material.
Table 1-7 Selection of the dryer according to the material The original state is suitable for the dryer. Large-scale continuous treatment of a small amount of liquid, mud spray drying fluidized bed multi-stage drying drum, vacuum belt inert medium fluidized bed paste airflow Drying, stirring, rotary drying, ventilation belt, dry shock wave, spray drying, conduction heating, mixing, drying, conduction, heating, trough, mixing, drying, ventilation, drying, sheet, belt, ventilation, drying, rotary coil, steam drying, rotary ventilation, drying box, ventilation, drying, vacuum cylinder Stirring granular material belt type ventilation drying, rotary ventilation drying vertical air drying dry fluidized bed drying (fluid type)
Rotary Dry Rotary Steam Coiled Fluidized Bed Grooved Stirrer Type Ventilation Dry Conical Rotary Dryer Multilayer Disc Dry Powder Material Fluidized Bed Drying Airflow Drying Batch Fluidized Bed Drying Vacuum Cylindrical Mixing Material Flowing Tunnel Type advancing trolley type box-shaped jet flow type, multi-cylinder single-tube or multi-cylinder coating, coating liquid infrared, jet flow parallel flow heat drying
Teach you to select drying equipment based on material status
Drying can be divided into two major categories. One type requires the original shape of the raw materials after drying, such as drying of many foods and drying of building materials. The other is to dry the liquid, mud, block, and powder materials into a powder or granule product. Some drying processes, especially the drying of pharmaceuticals, are expected to not destroy the original crystal form. In the production of pharmaceuticals, it is also common to use liquid and powder materials to achieve a certain particle size after drying.