Ningbo Siny Medical Technology Co., Ltd , https://www.sinymedical.com
Working principle: The knife-type fan machine is composed of a stainless steel upper cover lower body crushing chamber, and is screw-closed. The high-speed operation of the vertical motor drives the horizontally mounted grinding blade to impact and shear the material. Since the pulverized object is agitated in a closed space, the pulverizing effect is relatively uniform and is suitable for dry materials. The machine has a rocking design for easy dumping and cleaning of materials.
Knife-cutting mill precautions 1. For the safety of the user, the power supply must be grounded.
2, the pulverized material must be dry, it is not suitable to process Chinese medicine for moisture and oil.
3. Do not smash the drug by more than half the capacity of the crushing tank.
4, the general Chinese medicine smash only takes half a minute, the hard medicine can be crushed for one minute.
5, the machine can not be used for a long time, each time the boot time must not exceed 5 minutes. If the number of processing is large, it should be used at intervals to prevent the bearing from overheating and damage the motor.
6. Do not activate the switch when the top cover is open.
7. After long-term use, the carbon brushes and blades are severely worn and need to be replaced.
8. Always check the screws of the blade and tighten them.
Knife-cut mill use precautions
The knife- cutting mill is carefully manufactured with the introduction of advanced foreign technology. It is suitable for shearing and pulverizing materials with high fiber content such as Chinese herbal medicine ribs, roots, vines, tobacco leaves and stems. It is the first choice for testing and small batch production in the pharmaceutical, tobacco and other industries. The whole machine is made of 304 stainless steel material and meets GMP standards.