First check if vacuum can be taken. If it can be vacuumed, check if the heating wire is heated. If the heating wire is not heated, look at the contactor that controls the heating wire. (Or force the contactor to suck and look at the heating wire. Whether it is hot or not) Replace the heating wire without heating. Also check whether the heating time relay of the baler is intact, and see what the setting time of the heating time relay is. Key words: baler  Vacuum packaging machine   Packing belt  Insert Pad are a disposable product that can be easily changed without washing.Some of the super absorbent core layers are composed of polymer absorbers and villi.Absorb quickly and fully, effectively condense without infiltration, ensure anti-seepage and anti-leakage, make users dry and cool at any time.At the same time the use of leakproof elastic pants edge, unique U-shaped design, gently wrapped around the legs, effectively prevent urine leakage side, no matter what the circumstances are dry and clean.Arc draping, and considerate body.It also has soft, dry and non-woven fabric surface with good air permeability, which makes users feel comfortable and natural at any time. Insert Pad Insert Pad,Disposable Insert,Attends Insert Pads,Diaper Liners Shandong Kangshun Daily Products Co., Ltd , https://www.centurybenifit.com
In addition, analyze whether there are the following reasons:
*: Maybe you have replaced the strap, the original strap is thicker, and now the thinner, the semi-automatic baler's hot head is not fully in place. Solution: Re-adjust the position of the hot head. Secondly, it may be that the position of the hot head of the semi-automatic baler is offset or the joint of the strap is slightly biased.
Third: It has something to do with the material of the packing belt. Maybe you have more ingredients doped in the raw materials of the packing belt. The main component of the packing belt used in the market is polypropylene, commonly known as pp. A better packing belt has a pp content of more than 95%. Other ingredients are more complex, such as inorganic fillers such as calcium carbonate, talc, wollastonite, and glass fiber. If there are more ingredients, the hot melt viscosity is worse. It is recommended that you let the supplier provide the matching parameters.
If the above problems are ruled out, then only the machine can be judged to be aging or changing parts.