How to buy a micro tiller

Some users purchased new farm machines only for seasonal use, and allowed them to use the sun and rain after use, until the season came. At this time, often the machine can not rotate, such as the engine cylinder, piston rings, valves, seats, pipes and other rust dies, the loss is very large. In order to avoid this from happening, equipment that is used for a longer period of time and then reused shall be subjected to the following special maintenance:

1 Clean the appearance of the machine. 2 Put the machine in a dry and ventilated place. 3 Discharge all the cooling water from the water pipes and tanks. 4 Start the implement for about 20 seconds to allow the residual moisture in the body to evaporate. 5 crank the crankshaft, set the diesel engine at the beginning of the compression stroke (at this time, the intake and exhaust valves are closed, the high pressure pump's roller is not pressed by the camshaft's cam), keep this position and move the intake and exhaust pipes. Mouth bandage (the purpose is not to allow insects and dust, impurities into it). 6 Apply a layer of fresh engine oil to agricultural machinery and parts where the engine surface is apt to rust. 7 For each two-month stop, untie the air intake and exhaust pipe, start the engine for more than ten seconds (without adding cooling water), reposition the machine in the original parking position, and re-wrap the inlet and exhaust pipe.

The appearance of the thresher, pump, grinder and other equipment should be cleaned, and a good anti-rust oil on the rust-proof parts, and then cover the inlet and outlet to prevent hard objects from falling into it. For the pump, drain the water from the pump housing.

Ultra Thin Ceiling Light

Kitchen Ceiling Light,Ultra Thin Ceiling Light,Bedroom Absorb Dome Light,Ultra Thin Cover Ceiling Light

Hangzhou Lingjun Technology Co.,Ltd , https://www.lingjunelectrical.com