How to maintain the straw smashing returning machine

After the operation is completed, the inspection straw smashing and returning machine shall be cleaned. The soil layer on the inner wall of the blade guard and the inner wall of the side plate shall be promptly removed to prevent the increase of the load and exacerbate the blade wear. When taking care, you must fill the butter on time.

When the maintenance tool is finished at the end of each year, the transmission should be cleaned and the gear oil should be replaced. The amount added must not exceed the dipstick marking line. Before working, check the height of the oil level and release the dirt deposited on the bottom of the gear box in time.

Replace the hammer claws or slings should be replaced in groups to maintain the dynamic balance of the knife shaft, the same group of hammer claws according to quality classification, the quality difference is not more than 25 grams, only the same quality hammer claw or throwing knife can be installed On the same roller.

After the operation is completed, clean and inspect the entire machine. Each bearing should be filled with butter, and all parts should be properly treated for rust prevention. The machine tool should not be placed in suspension and should be placed on a pre-padded object, parked in a dry place, and be loosened. No ground wheel should be used as a support point. Put in stock and padded it up with wooden blocks to keep the blade away from the ground to prevent deformation.

Disposable Medical Mask

CE Certified 3 PLY Medical Face Mask, EO-Sterile / Non-Sterile:

Box of 50 Face Masks In Sanitary Dispenser Box: Our 3-layer sanitary Medical Masks come In a sealed plastic shrink-wrapped box that has a perforated dispenser top, so you can conveniently dispense one Surgical Face Masks Medical at a time. 3 Ply Face Mask of Filtering Protection: Our 3-ply Surgical Masks Disposable Medical Grade contain a premium pp non-woven outer filter layer, a premium melt-blown polypropylene filtration layer, and a premium soft absorbent pp non-woven inner filter layer. Soft elastic ear loops and flexible adjustable nose clip. Easy Breathing, Comfortable to Wear: Tri-folded Face Mask Medical Virus Protection that extend down to cover the face from the nose to underneath the chin with a snug secure fit. The Face Masks Disposable Antiviral For Flu are designed for general sanitary purposes only. Medical Masks Disposable Antiviral For Flu are medical and are proven to reduce the transmission of diseases. Single-use Face Masks Medical Flu.
Ideal for Most Workplaces: Our essential personal protective Medical Face Mask are worn all over the world in most common workplace or medical environments. They are used by Salon and Spa Professionals, Food Service, Retailers, Warehouses, Offices, Schools, both Indoors and Outdoors.

Face Mask Medical Virus Protection,Medical Masks Disposable Antiviral For Flu,Face Masks Disposable Antiviral For Flu,Face Masks Medical Flu

Suzhou JaneE Medical Technology Co., Ltd. , https://www.janeemedical.com