The tractor runs on slippery mud or snow and ice, and should be particularly cautious when driving. Drive at a low speed and master the direction. The fuel should not be too fierce, otherwise it will cause slippage, which will not only reduce the speed, but also cause a car or skid. If the rear wheel slips, use the steering wheel to deflect the front wheel to the slip direction. After the side slip is eliminated, gradually return to the positive direction. Do not use the brakes during driving, but not emergency braking, so as to avoid slipping and causing serious accidents. As a last resort, only the internal combustion engine and brake can be braked at the same time. If there is a slippery phenomenon on the downhill slope, you cannot brake the deceleration, but speed up the speed appropriately to suit the speed of decline. When the speed is matched with the speed of decline, gradually reduce the throttle to reduce the speed. When turning is required on muddy roads or soft soils, deceleration can be applied according to the situation to reduce the radius of gyration and facilitate steering. When a mud car is stuck on a muddy road, stop immediately and do not rush over it so as not to sink deeper and increase wear or damage. According to the specific circumstances, dig away the virtual land, and fill the planks, stones, branches and grass under the driving wheel. If necessary, use another tractor to pull it out. TD Cloud Security Co.Ltd , https://www.cctvcameraexpert.com