Automobile Industry Solvent Recovery Machine Solvent Recovery Machine industry wide application, uses a wide range of production and processing industry basically will be used, kinds of solvent solvent recovery machine Recyclable are many, Calstar® is a solvent recovery machine equipment, it can help many enterprises to save most of the money, reduce the purchase cost of solvent, solvent recovery machine was born to the society has an important significance to the environment, reduce the waste of resources, and solve the environmental pressure. Automobile industry Solvent Recovery Machine SHENZHEN KUANBAO ENVIRONMENTAL EQUIPMENT CO., LTD , https://www.calstarkb.com
Chiller | industrial chiller | air-cooled chiller | chiller operation process:
1. First turn the power on to the ON position.
2. Turn on the cooling switch. At this time, please note that the cooling water inlet and outlet valves must be opened; (the air-cooled type does not require a water tower).
3. Then turn on the chilled water pump switch, Jing attention to the frozen water inlet and outlet valves must be opened, the compressor will automatically run after the delay switch, please check and adjust the required temperature.
4. When shutting down, please operate the shutdown in reverse order.
Cold water machine|industrial chiller|air-cooled chiller|When chiller operation should pay attention to matters 1. The chilled water pump shall not operate without water in the water tank;
2. Operate the switch as much as possible to avoid continuous switching;
3. When the temperature of the frozen water reaches the set temperature, the compressor will automatically stop running, which is a normal phenomenon;
4. The temperature switch should be avoided to be set below 5 °C to prevent the evaporator from freezing; (except for low temperature freezer).
5. In order to ensure the cooling effect of the chiller, keep the condenser in good condition, please clean the condenser and evaporator and water filter regularly.
At present, to promote energy saving and emission reduction, the development of low-carbon economy has become the main theme of the development of the world economy, especially for China which is a relative shortage of resources per capita, serious ecological damage power development, in the huge pressure of energy and environment, promote energy-saving emission reduction, it is imperative to develop low carbon economy. In the Copenhagen world climate conference held in December 2009, the Chinese government commitment to the 2020 unit of GDP carbon emissions than in 2005 decreased by 40% ~ 45%. In the future, all walks of life will move towards low energy consumption, low pollution and low emission direction, the development of flexible packaging industry can not be contrarian. Soft packaging industry as one of the more serious energy consumption and pollution, in the face of increasingly prominent energy and environmental problems, should assume more social responsibility, to contribute to energy saving and emission reduction.
In China to use a large number of organic solvents, emissions of a large number of high concentration of organic waste gas is an important cause of environmental pollution caused by the soft packaging industry. At the same time, the evaporation of organic solvent in the process of use also caused the problem of indoor pollution and safety. With the increase of people's awareness of environmental protection and national environmental protection, organic emission problem of the soft packaging industry has aroused social attention, soft packaging enterprises also obviously feel the increasing pressure of environmental protection, high discharge mode used by now has been difficult to project eia. Moreover, the future of national legislation in the field of environmental protection will be more stringent, flexible packaging enterprises must be a pressing matter of the moment to take effective measures to reduce emissions and energy consumption of organic waste gas, in accordance with the national energy-saving emission reduction targets
Introduction to chiller operation process
Industrial chillers are widely used in industrial production of plastics, electronics manufacturing, electroplating, pharmaceutical and chemical engineering, ultrasonic cooling, printing, etc. It precisely controls the temperature required for modern industrial mechanized production, thereby greatly improving production efficiency and product quality. The industrial chiller is easy to operate, reasonable in design and excellent in quality. It has hundreds of specifications and is an indispensable companion for modern industrial production.