The working process of the stone washing machine is generally: raw material storage, transportation, cleaning, finished material transportation, sewage sedimentation and reuse. The mine construction site has strict requirements for washing the equipment in the cleaning of raw materials. Under the premise of ensuring the quality of the project, it is necessary At the same time to ensure the supply of stone material in the concrete mixing station, for these supplies need to move the specific work flow of the crushing station, the following is a powerful road bridge for everyone: 2011.10.08 MYY
First, the requirements of the stone washing machine on the layout and sanitation of the construction site:
1. Reasonably arrange the storage area of ​​raw materials and finished materials to prevent pollution of the finished materials due to environmental or climatic reasons during storage;
2. Arrange the power supply lines reasonably to ensure the safety of electricity consumption;
3. Reasonably arrange the pipelines such as water, sedimentation tank and return water to keep the production site clean.
4. Special consideration should be given to storage, care, transportation and maintenance during the period of equipment decommissioning.
Second, the stone washing machine transportation process 1, raw material storage: the raw material storage is generally the storage hopper, the storage hopper can be loaded by the loader, the width of the bucket opening is more than 3 meters, the hopper capacity depends on the loading height of the loader, the transportation height, the self-flow angle of the raw material Depending on the situation, the bigger the better.
2, raw material transportation: generally use the belt to transport raw materials, according to the amount of mud containing raw materials to control the amount of cleaning, it is best to set the throttling device at the mouth. Because the amount of mud dust attached to the raw stone provided by the quarry is small and the adhesion is small, the cleaning process does not need to be too long.
3. Cleaning: The key to cleaning is not to add the dirty water of the trough when the stone is cleaned, so as to avoid the secondary pollution of the stone. 4. The finished material is transported: the stone that has been cleaned is generally transported to the finished material storage area through the belt conveyor or The storage hopper is ready for use, so it is best to cover the storage area or wash it. 5, sewage sedimentation and reuse: no matter which type of stone washing machine will produce a large amount of sewage, considering the environmental requirements, generally set up sewage sedimentation pool Depending on the production volume, the tank volume and sedimentation level are determined, taking into account the mechanical or manual cleaning of the sludge.