The belt dryer is a continuous drying equipment for mass production. It is used for the drying of flakes, strips, granules and some paste materials with good gas permeability. It is widely used in industry and is mainly used for drying. Block material and fibrous material. In short, the material dried by the belt dryer must have a certain shape and still maintain a certain shape after drying.
How to choose a belt dryer:
The first step is that it is important to test the dry material for a small sample. Therefore, whether or not the equipment supplier has material testing equipment and experienced sample personnel is the most direct way for customers to measure the true capabilities of the manufacturer. Qualified belt dryer manufacturers generally provide customers with a minimum of time after material testing, including: actual material evaporation, dynamic drying vacuum, drying temperature distribution, feed amount, actual drying time, Technical parameter reports such as actual product capacity, unit energy consumption ratio, etc., to facilitate customers to select the type and specifications of equipment that can meet production requirements.
The second step is to comprehensively examine the manufacturer's design level and manufacturing capabilities. Manufacturers generally provide a preliminary draft of the technical design plan based on the customer's production specifications and working conditions based on the material test report and a detailed statement of the design rationale in the plan. The technical design is an extremely important part of assessing the manufacturer's manufacturing capabilities in vacuum belt dryers, especially the manufacturer's design description of key equipment such as vacuum system design, heating system design, and correction system. Design, design of the cleaning system and design of the feeding and discharging system. Another aspect of manufacturing capabilities is to examine the actual use of the manufacturer's users. Customers can request on-site visits based on the list of users provided by the manufacturer. If the manufacturer does have sufficient strength, it will not reject the reasonable request of the customer, and some can even provide multiple visit targets for customers to choose. Companies with limited manufacturing capabilities or low levels of technology are generally difficult to do.