Injection Blow Molding,Injection Molded Parts,Silicone Injection Molding,Injection Moulding Products HTD INTERNATIONAL , https://www.jeehtd.com
5 points in the summer of the agricultural machinery, remember to remember 5 o'clock in summer.
As the weather gets hotter, people are thinking about how to avoid the heat. Like people, agricultural machinery is also required to spend the summer, then how can the agricultural machinery to avoid "heat stroke" in the hot summer? You need to keep in mind the following belts: 1. Look at the water temperature table to prevent water shortages: In high-temperature weather, the water in the water tank evaporates faster. Always check the amount of cooling water and pay attention to the water temperature table. When you find water shortage, immediately idling and then add water, and be careful not to immediately open the radiator cover to prevent scalding. 2. Anti-deterioration of oil: Lubricants are vulnerable to heat thinning, poor oxidation resistance, perishable, and even cause failures such as the burning of the bearing bushes. Therefore, the crankcase and gear box should be replaced with summer lubricants, and the quantity of oil and oil quality should be checked frequently and replaced in a timely manner. 3, to clean the engine surface oil in a timely manner: the engine if the oil is too thick will affect the heat, to lay the hidden dangers of various parts and components, using high-pressure injection method, will not corrode the body parts of the cleaning agent to clean the engine parts. 4, cool explosion-proof tires: high summer temperatures, tire rubber is easy to aging, severe puncture will occur. Therefore, the tractor should check the tire pressure at any time during the trip and find that the tire is overheated and the air pressure is too high. Stop the vehicle in a cool place and cool down. Do not pour cold water on it and do not put it there. Otherwise, it will cause a puncture on the way.