Every Year we will upgrade new beauty system keeping with the times Newest Beauty Device
We have the newest 808nm Diode Laser,we have newest HIFH for wrinkle removal,We have Newest Body Slimming Machine ,We upgrade the IPL to OPT SHR system
We aslo will keep the eyes to market and make the best beauty machine for all of our client
Lasylaser--Your best choice for beauty!
*Related Products:Skin Care Machine,salon spa equipment,Tighten Skin Machine,Skin Rejuvenation Machine.
Face Lifting Face Lifting Machine,Scar Removal Machine,Ipl Face Lifting,Skin Care Machine,Tighten Skin Machine,Skin Rejuvenation Machine Zhejiang Lasy Science and Technology Co.,Ltd. , http://www.lasylaseripl.com
Lasylaser New Beauty Equipment
The basic six points of operation and maintenance of pneumatic tools
1. The correct generation of gas supply system: Inlet pressure at the inlet of the tool (non-air compressor outlet pressure) is generally 90PSIG (6.2Kg/cm^2), too high, too low are detrimental to the performance and life of the tool . The air inlet must contain enough lubricant so that the air motor in the tool is fully lubricated (place a white paper on the tool exhaust to see if there is oil, normally it is oily). The intake air must not contain moisture, and it is not appropriate if the air is not air-dried. 2. It is not allowed to remove the parts of the tool and operate it afterwards. This will cause the tool to be damaged in addition to affecting the safety of the operator. 3. If the tool is slightly faulty or cannot be used after it has been used, do not continue to use it. Check it immediately. 4. Periodically (about once a week) Check and maintain the tool, add grease (Grease) to bearings, etc., and add oil to the air motor. 5. Use all kinds of tools and be sure to follow all safety regulations and instructions for use. 6. To use the proper tools to work, tools that are too large are prone to work injuries, and tools that are too small can easily damage the tools.