First, prevent iron parts from rusting. In particular, thin-walled iron parts, such as iron pipes for pumping water pipes, should be removed in winter and cleaned, painted with anti-rust paint, stored in a ventilated, dry warehouse, and then installed and used until spring eve next year. Other iron parts such as ploughshares, coulters, etc., should be cleaned, wiped dry, and then painted with engine oil.
As China leading professional manufacturer
and supplier of Chondroitin Sulfate, Chondroitin Sulphate sodium, CHS for over
18`s years, Hi-Tech has great reputation with superior quality products, more
competitive price and thoughtful customer service.
Chondroitin is one of the most sought after
joint-supporting supplements available on the market today due to how it helps
rebuild cartilage naturally and boosts recovery of tissue after injury or
exercise. Commonly available in formulas containing similar and complimentary
supplements like glucosamine and MSM, it`s taken by many people with joint
pain, osteoarthritis, and other signs of [wear and tear" due to aging.
Chondroitin sulfate is an important and
major component of articular cartilage, where it occurs as part of the large
proteoglycan, aggrecan. In the early stages of joint disease, both in animal
models and in man, there are change in chondroitin sulfate that affect the
chain length and the pattern of sulfation. These changes can be detected by
monoclonal antibodies and appear to reflect part of the cellular response by
the chondrocytes to damage to the articular cartilage matrix. The specificity
of the changes show that the biosynthesis of chondroitin sulfate is under tight
cellular control in chondrocytes and suggests that selected patterns of
sulphation within chains are expressed to suit different biological functions.
Chondroitin
Benefits and Uses
1. Helps Treat Osteoarthritis Joint Pain
2. Helps with Injury and
Exercise Recovery
3. Improves Wound Healing and Skin Health
Chondroitin Sulfate Chondroitin Sulfate,Glucosamine Chondroitin Sulfate,Glucosamine And Chondroitin Sulfate,Glucosamine Chondroitin Complex Qufu Hi-Tech Trading Co., Ltd. , http://www.chinahyaluronic-acid.com
Second, we must prevent the motor from getting wet. If the motor is not used for a long time, it should be placed in a dry, ventilated, clean warehouse. If the motor is put together with pesticides and fertilizers, or placed on damp mud, over time, it will be corroded and dampened, and the internal insulation performance will be reduced, resulting in short circuit, grounding, leakage, and even electric shock. .
Third, to prevent the aging of rubber parts. The rubber parts are damp and sticky with oil, and are prone to ageing, cracking, and shortening the service life. The tractor, the pump, and the belt or hand tape on the harvester should be removed, hung on the wall or stored in a dry and ventilated place. During parking of the tractor during storage, the front and rear bridges of the locomotive should be jacked up with jacks or bricks to keep the tires off the ground without pressure and to maintain proper air pressure.
Fourth, to prevent woody rotten. For example, the barrels and drums of rice-making machines are made of wood. If they are left behind, they are not maintained. The machine is susceptible to mildew after it is wet. Therefore, it should be washed, dried, coated with tung oil, and stored in a ventilated, dry place.
Fifth, to prevent the body, tank freezing. In winter, when the tractor is operating, the cooling water is not released, and the body and water tank are easily frozen. Therefore, after the tractor is operating, especially if it is to be parked for a long time, the cooling water must be exhausted to prevent the freezing of the cylinder block and the water tank.
Six, to prevent the deformation of the spring. The clutch on the walking tractor is often combined with the assembly. When the hand is dragged into the storage and storage, the handle should be placed in the position of “closedâ€. Otherwise, the clutch spring will be under pressure for a long time and lose its elasticity, which will cause plastic deformation and be scrapped in advance. The intake and exhaust valves of the engine should also be placed in the closed state. In this way, the spring can not only avoid long-term pressure, but also prevent dust from entering the cylinder and corroding the valve and causing air leakage.
Seven, to prevent the battery from curing. When large and medium-sized tractors are parked for a long time, the batteries should be dismantled and the electrolyte should be poured out. The outer surface should be wiped clean with distilled water. After sufficient electricity is applied, vaseline should be applied to the surface of the electric piles and ties to be placed in a clean and warm indoor space. To prevent vulcanization or cracking.