First, double-sided mushroom. The first 20-mesh plastic screen was laid on the bed frame, and then the sheet was inoculated so that the bottom of the bed and the material surface were simultaneously mushroomed, shortening the production cycle and increasing the production by more than 20%. Second, add warming agent. When stacking, add 1% of the dry mass of the culture medium to the temperature increase agent to speed up the bacteria growth. Third, two inoculations. Straw cultivation, in the 3-4 days after the sowing of grass, in the gap between grass layers strains into the second seeding, the amount of bacteria for the first dose of about 20%. In this way, once the first sowing mushroom was harvested after the first sowing, the second broadcasted strain was decomposed from the haystack, accumulated nutrients and continued mushrooming, which could increase production by 20%-30%. Fourth, bed cover. 1 bed cover soil. When the mycelium is full, the surface of the material is covered with 1-3 cm thick fire soil or cooked soil of the vegetable garden, which can make the mushroom body fat and reduce dead mushrooms, and the yield increase can reach 20%-30%. 2 grass ash. When the material surface is covered with mycelium, a layer of 1 cm thick ash is sprinkled to inhibit the acidity of the culture material. Fifth, spray Taomi Mi Shui. Frequently using 25% of Taomi water spray culture materials can increase production by 25%-30%. Six, spray Gan Ling. After unmasking and picking mushrooms, spraying 30% cooked Ganling 400 times on the second day can make the mushroom body lighter. Seven, spray rice water. 40% rice bran, 30% peanut meal, 5% lime, and 25% ripe urine. Mix the above raw materials and ferment in the cylinder for 15-20 days, then cook and filter. Take 4 of the filtrate, add 6 parts of fresh water, and spray after the harvest of the 2nd tidal mushroom to increase the yield. Eight, spray green Wei Bao. When the material is piled up, add 0.2% of Green Vespa phytochemical nutrient, which can make the mushroom body weightless, and it is not easy to open the umbrella. Nine, adjust the acid and alkali. After the first tidal mushroom was harvested, supplement some of the nutrient solution and adjust the pH of the culture material to be alkaline, so as to promote recovery of hyphae, prolong the period of mushroom harvesting, and increase mushroom production. 1Spray 3% lime water on the stockpile, make up the water and adjust the pH to be alkaline. 2 Dry cow dung and human urine, break the cow dung, add 40% of human urine, and mix it for one day before use. Apply a batch of mushrooms and apply to the material surface. For example, add some chicken, duck and dung. good. 3 Spray 0.1% urea and bran water (add 100 kg of water and add 10 kg of bran and filter after boiling. Take 50 kg of filtrate plus 50 kg of clear water). The amount of urea is 0.1%-0.2%, the amount of ammonia produced by the use of excessive increase, prone to comatus umbrella bacteria. Ten, spray triacontanol. Before sowing, spraying 0.6-0.8 mg/kg triacontanol on the culture material can increase the number of mushrooms. Portable 3 Ply Disposable Masks Non-woven Face Mask With Elastic Earloops Disposable Surgical Face Mask Dongguan Anmeixuan Electronic Technology Co., Ltd , https://www.hyashine.com