NFC9112, NFC9112 anti-glare floodlight "NFC9112" NFC9112

Overview:
NFC9112 anti-glare floodlights are suitable for floodlighting in all kinds of installations, platforms, corridors, passages, workshops, factories and other places.
A performance:
● High-efficiency, long-life gas discharge lamp is used as the light source, and through advanced light distribution design and special process treatment, the light is soft and uniform, no glare, power factor>0.90, average service life is more than 10000 hours.
● With optimized structural design and high-strength aluminum alloy casing, it has strong shock and impact resistance.
● Corrosion-resistant shell material and surface coating treatment to ensure that the lamp does not corrode or rust in harsh environments.
● It is very convenient to change the bulb by gently turning the transparent part.
● The lamps and electrical boxes are of split design, small in size, light in weight, compact in structure and simple in shape.
● Various installation methods such as light poles, ceilings and booms can meet different environmental lighting needs.
Second use:
1. Determine the installation location and proper installation method of the lamps and ballasts according to the site environment and lighting needs. According to the distance from the ballast to the 220V power contact, prepare a φ8~10mm three-core cable with a corresponding length.
2. Fix the lamp and ballast in a well-defined installation position.
3. Use a socket wrench to unscrew the two fastening bolts on the ballast cover, open the ballast cover, and introduce one end of the three-core cable of the lamp through the ballast output port to the ballast. In the cavity, connect the yellow-green wire, the blue wire and the brown wire to the 4, 5, and 6 terminal blocks of the ballast, and then press the three-core cable with the lead card and then tighten the compression screw.
4. Pass one end of the prepared three-core cable through the introduction device of the ballast box input port, introduce it into the ballast cavity, and then connect the L line, N line and ground wire to the ballast 1 and 2 respectively. On the terminal block of the 3rd position, tighten the three-core cable and tighten the compression screw.
5. Close the ballast cover and tighten the fastening bolts, and then connect the other end of the three-core cable to the 220V power supply to achieve illumination.
6. When replacing the lamp, first cut off the power supply, loosen the locking screw on the side of the lamp cap, open the lamp cap through the hinge flip mechanism, unscrew the old bulb and replace it with a new one.
Three Note:
1. The power must be turned off when installing and maintaining the luminaire.
2. When using, the surface of the lamp has a certain temperature rise, which is a normal phenomenon; the center temperature of the transparent part is high and must not be touched.
3. The suitable installation height of the luminaire is 4~6 meters, and the large projection range of zui is 15 meters.
4. If the external flexible cable or cord of the luminaire is damaged, the line shall be replaced by the manufacturer or its service agent or a qualified person.
Four technical parameters:
Rated voltage: 220VAC 50Hz
Shell protection: IP65
Inlet thread: G3/4
Cable introduction: φ8~φ10mm
Dimensions: lamp body: φ255 × 191mm Ballast box: 234 × 196 × 93mm
Five quality assurance:
NFC9112 anti-glare floodlights are strictly in accordance with ISO9001:2000 international quality management system standards for quality control, to ensure that product quality is higher than national standards, fully meet the design requirements, the product is guaranteed for 7 years, the light source is guaranteed for one year, since the date of purchase Within 7 years, any failure of the product under normal use is the responsibility of the company for free maintenance.

Tattoo flash are prepared tattoo designs which are intended for use in rapid tattooing. Most visitors to tattoo shops have seen tattoo flash, as they are typically displayed in the walls and in portfolios to give customers an idea of the kind of work they can receive. Tattoo flash encompasses a wide range of styles and designs, and it can come from a variety of sources.


Originally, tattoo flash were designed by the artist, who would display flash so that customers could pick a tattoo they wanted. Artists would also modify flash or create custom pieces on request. Over time, artists started trading flash with each other, and also also selling tattooflash, disseminating styles and designs across a broad community. Ultimately, companies started hiring tattoo flash designers, who produce a high volume of pieces for commercial sale on individual sheets or in books of collected tattoo flash.


Some people look down upon tattoo flash, arguing that while it's fine to use flash for inspiration, tattoos really ought to be custom designed, to create a unique and original piece. Copying from flash can also have complex copyright implications; for example, a client who prints out a piece from the Internet and asks to get it as a tattoo might potentially be violating copyright laws, unless he or she has been given explicit consent to use the work.

Tattoo Book & Design

Tattoo Books,Tattoo Design Books,Tattoo Art Books,Tattoo Photo Books

Amztatto Supply Co., Ltd. , https://www.amztatto.com